Oetiker Clamp
Should You Buy Expensive Brass Fittings?
An alloy of zinc and copper, brass fittings has been known for its strength and durability. These over sixty different kinds of brasses have specific uses for high machining, cold working, casting, electrical, architectural, fluid handling, decorative application, and so on. Just like other materials, it has alternative in the form of stainless steel fitting, which of course, in cheaper price.
When these inexpensive stainless steel fitting can do the same job, should you still buy the expensive brass fittings? Definitely, the answer is yes.
Basically, brass fittings have the best quality in its various uses. Its alternative might do the same job but there would be a great difference in the effectiveness of these materials. Brass fittings have better quality because of its composition, zinc and copper that made it sturdy. So, over the years, brass fittings can assure of the same efficiency in its application.
Worrying on the performance of the brass alternatives is a trouble. For several times, you need to check it out to avoid some accidents caused by its malfunction. Hence, with brass fittings, you can comfortably settle down concerning its efficiency. These are usually used in lift truck sections, railway carriages, gas valves, and gears for cars.
Comparing the price of stainless steel fittings and brass fittings, the latter may be more expensive, yet, it would last for many years. On the other hand, stainless steel fittings, as made from recycled materials of nickel, might let you change the fittings for several times, especially is subjected to extreme temperatures. Simply stated, the cheaper alternative would be more expensive because the cost can be multiply for several times, as you need to change the fittings over and over again.
When handling fluid, the perfectly fabricated brass fittings along with a Teflon tape certainly provide a protected, leak-proof seal. More so, brass can effectively join two materials such as pipes than any other alternative, without worrying on its sturdiness especially if subjected to pressures. These are usually used by oil companies because it does not cracked easily.
Brass fittings, with a little amount of Tin, became highly non-corrosive materials. It is resistant to rust, so, it is highly recommended as materials for seawater and acidic environment. Meaning to say, this high-tensile material can be used in almost anywhere.
With its physical appearance, the golden surfaces of brass fittings make it more attractive and appealing when it comes to architectural and decorative application. It can easily match and improve the interior designs, providing an elegant atmosphere. Even jewelers use brass because it never tarnished.
If you want to make the most from your money, brass fittings are the best choice than its alternative products. The quality of brass fittings is proven to be cheaper in the long time because of its various properties. You can never go wrong with brass because of its précised specification that assures you will never do any re-work for a long time. The comfort and peace of mind it gives you can never be measured and incomparable than its alternative.
About the Author
Know more about beverage tubing at InstallationPartsSupply.com.
Motion Pro Stepless Clamps
|
|
Oetiker Clamp Drive Shaft Boot 112.1- 120mm 9 mm width $12.66 |
|
|
50 NEW OETIKER Hydropex HCL0750 3/4″ Pex Clamps $13.00 |
|
|
Pex Stainless clamp oetiker 1″ Cinch Crimp Ring 500 pc. $177.99 |
|
|
CLAMPS Oetiker Stepless Ear S.S 8.7 x 11/32 @10 pkg. $2.43 |
|
|
CLAMPS Oetiker Stepless Ear S.S 9.5 x 3/8 @10 pkg. $2.44 |
|
|
Oetiker Clamp Drive Shaft Boot 88.1- 96mm 9 mm width $11.87 |
|
|
OETIKER 14100069 CLAMP RATCHET PINCERS $7.99 |
|
|
OETIKER 15/16″ HOSE CLAMPS (100) PC ~ NEW $44.94 |
|
|
Oetiker Stainless Clamp Drive Shaft Boot 90.1 – 98mm $10.68 |
|
|
CLAMPS Oetiker Steples Ear S.S 37.6 x 1-3/8 @10 pkg. $3.85 |
|
|
Oetiker Oe 5/8″ 2-ear Clamp1518 10100024 $7.27 |
|
|
Knipex/ Oetiker 1099 clamp, squeeze, cutter pliers $18.50 |
|
|
14.5 OETIKER CLAMPS $5.00 |
|
|
OETIKER Strapless Clamps x100 17800171 21-26mm 026S9 NEW $49.99 |
|
|
Oetiker CLAMP pliers with side squeeze, Knipex 1099i $27.50 |
|
|
Oetiker CLAMP pliers with side squeeze, Knipex 1099i $27.50 |
|
|
CLAMPS Oetiker Stepless Ear S.S 10.9 x 27/64 @10 pkg. $2.47 |
|
|
3/8 BARBED FITTING AND OETIKER CLAMP VARIETY PACK KIT $65.00 |
|
|
Oetiker Stainless Clamp Drive Shaft Boot 60.1 – 68mm $9.10 |
|
|
CLAMPS Oetiker Stepless Ear S.S 14.5 x 9/16 @10 pkg. $2.55 |
|
|
Oetiker CLAMP pliers with side squeeze, Knipex 1099i $27.50 |
|
|
CLAMPS Oetiker Stepless Ear S.S. 6.5 x 1/4″ @10 pkg. $2.60 |
|
|
Knipex / Oetiker 1099 , cutter – clamp pliers $6.00 |
|
|
(1 LOT) Oetiker Stepless Spring Clamps (Constant Tension) $200.00 |
|
|
Oetiker Stainless Clamp Drive Shaft Boot 84.1 – 92mm $10.28 |
|
|
Oetiker Oe 3/8″ 2-ear Clamp0811 10100011 $8.13 |
|
|
Oetiker Oe 9/16″ 2-ear Clamp1315 10100019 $7.15 |
|
|
Oetiker Oe 7/8″ 2-ear Clamp2023 10100030 $13.10 |
|
|
Porsche 911 (69-75) 930 Axle Boot Clamp 74 mm Rear (x4) $28.90 |
|
|
10 Oetiker 2 ear hose clamps carbon steel $2.00 |
|
|
Oetiker 2 Ear Crimp Hose Clamp 1-1/8″ Lot of 100 $35.00 |
|
|
Oetiker Stainless Clamp Drive Shaft Boot 102.1 – 110mm $11.47 |
|
|
CLAMPS Oetiker Stepless Ear S.S 11.3 x 7/64 @10 pkg. $2.48 |
|
|
Oetiker Clamp kit, hose clamps,air clamps | IPS247.com $77.99 |
|
|
Oetiker Stainless Clamp Drive Shaft Boot 98.1 – 104mm $11.07 |
|
|
Side Jaw Clamp Crimping Tool $30.50 Apply and remove O-Clamps with this very popular clamp crimping tool. It has side pincers to get you an extra secure fit and it’s easy and comfortable to use. When you’re attaching O-clamps to your beer or air lines, this crimping tool gives you a tight seal with no gaps, that won’t loosen up over time. You can’t say that about traditional drive clamps! It’s also quite handy for cutting wire, stra… |
|
|
Saeco Oetiker Clamp 7mm … |
|
|
Ideal Corp. 61001-58 Crimp Clamp Tool $5.81 Used to install or remove pinch crimp clamps…. |
|
|
SEPTLS32018500056 – Clamp Service Kits $64.95 Clamp Service Kit contains assorted sizes of zinc plated 2-Ear Clamps for industrial use and OEM applications. Suitable for EPDM rubber hose, plastic tubing, electrical cable, and high-vibration equipment hoses. Tamper-proof durable seal due to robust construction. Ideal for air and fluid media lines. Specially deburred edges reduce the risk of damage to the part being clamped. Tampering is visibl… |
|
|
PEX QUICK CINCH CLAMP $29.21 … |
|
|
50 pc bag Oetiker Style SS Single Ear Hose/Seal Clamps size 1/4 or 7mm $11.99 007.0-505R, Band width and thickness: 5mm X 0.5mm, Diameter: 7mm, Open and cosed range based on OD of the hose: 5.8-7.0mm… |
|
|
Oetiker Style SS Single Ear Hose Clamps size 15.3mm 50 pc bag $13.99 SS Seal hose clamps. Band width and thickness: 7mm X 0.6mm. Diameter: 15.3 mm. Open and closed range based on OD of the hose is: 12.8-15.3 mm… |
|
|
50 pcs Oetiker Style SS Single Ear Hose Clamps size 3/8 or 11.3mm $12.99 Stainless Steel Hose Seal Clamps, Open and closed range based on OD of hose is: 9.6-11.3mm…. |